For Sale OTC 7927A Steering Wheel Remover/ Lock Plate Compressor Set

OTC 7927A Steering Wheel Remover/ Lock Plate Compressor SetBuy OTC 7927A Steering Wheel Remover/ Lock Plate Compressor Set

OTC 7927A Steering Wheel Remover/ Lock Plate Compressor Set Product Description:



  • With this set it's easy to remove the steering wheels of most domestic and imported vehicles with or without tilt steering columns
  • Also accesses the turn signal switch and SIR modules on current GM vehicles
  • Includes steering wheel lock plate remover steering pivot pin remover for Saginaw steering columns and steering wheel puller
  • Plus four sets of cap screws all contained in convenient plastic blow-molded case
  • lifetime limited warranty

Product Description

With this set it’s easy to remove the steering wheels of most domestic and imported vehicles with or without tilt steering columns. Also accesses the turn signal switch and SIR modules on current GM vehicles. Includes No. 7815 steering wheel lock plate remover No. 7889 steering pivot pin remover for Saginaw steering columns No. 7245 steering wheel puller plus four sets of cap screws (2 of each size: M8-1.25 x 90 mm 3/8"-16 x 3-1/2" 5/16"-24 x 3-1/2" and 5/16"-18 x 4"). Contained in convenient plastic blow-molded case.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4Good wheel puller
By Jonathan Payne
This is the perfect kit for locksmiths (like me) for pulling old GM steering wheels to service the ignition lock cylinder. It also compresses the locking plate spring so you can remove the retaining clip. (if you have to ask, then you don't need it).

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy OTC 7927A Steering Wheel Remover/ Lock Plate Compressor Set

Discount Dan Post Big Kid Dusty Boot,Tan Distressed,5.5 M US Big Kid

Dan Post Big Kid Dusty Boot,Tan Distressed,5.5 M US Big KidBuy Dan Post Big Kid Dusty Boot,Tan Distressed,5.5 M US Big Kid

Dan Post Big Kid Dusty Boot,Tan Distressed,5.5 M US Big Kid Product Description:



  • Cushion insole
  • Long wearing PVC outsole
  • Cement construction
  • Round toe, cowboy heel

Product Description

Boot Height: Approx. 13'' Tall. All Leather. Toe: Round. Heel: Cowboy. Insole: Comfort. Outsole: PVC.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Perfect boots
By Marion
My daughter is very happy with her new Dan Post cowboy boots. In Holland we couldn't find the right bootsfor the right price but Amazon had them! They are exactly as we expected so she wears them with a big smile!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Dan Post Big Kid Dusty Boot,Tan Distressed,5.5 M US Big Kid

Affordable Personal Shredder,Strip Cut,15"x11-1/4"x20-1/4",14 Sheet Cap, Sold as 1 each

Buy Personal Shredder,Strip Cut,15"x11-1/4"x20-1/4",14 Sheet Cap, Sold as 1 each

Personal Shredder,Strip Cut,15"x11-1/4"x20-1/4",14 Sheet Cap, Sold as 1 each Product Description:



  • Color: Graphite, Color: Metallic Silver, Motor: 0.33 HP, Parts Warranty/Labor: 7 Year Parts - Cutting heads, Parts Warranty/Labor: 1 Year Parts, Sheet Shred Capacity: 14 Per Pass, Shred Size: 7/32", Shred Speed: 11 FPM, Shred Type: Strip Cut, Shredding Item: Paper, Shredding Item: CD, Standard Warranty: 1 Year, Throat Width: 9", Wastebasket Size: 7 Gallon
  • Sold as 1 each

Product Description

The Powershred PS-70 is designed for the high performance, heavier duty needs of the home office. With its unique design, this shredder provides the perfect blend of size, power, and features for use in a home office. Reduces confidential documents in 7/32" strips at a speed of 11' per minute. Shreds up to 14 sheets per pass, 25 to 50 times per day, for a total daily capacity as high as 700 sheets per day. Unique Safety Lock prevents shredder from accidentally turning on. 9" front feed paper entry accepts standard letter-size or legal-size documents. Durable steel cutters accept credit cards, staples, small paper clips and CDs (CDs shred in a designated safety slot). Shredder shuts off and alerts operator when a jam occurs, 7-gallon pull-out wastebasket is ajar or shredder overheats.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5A Work Horse!
By Casca
Purchased this for my lady to use in her home office. She really puts the machine to heavy use, and has worked very well. We have had the machine for circa one year now, still works great,is used heavily, and am presently considering getting one for my home office.We do not try to shred credit cards, cds, etc---just paper but the little robot does excellent work....peace and love to all....

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Personal Shredder,Strip Cut,15

Low Cost OTC 4305 1500 lb. Engine Load Leveler

OTC 4305 1500 lb. Engine Load LevelerBuy OTC 4305 1500 lb. Engine Load Leveler

OTC 4305 1500 lb. Engine Load Leveler Product Description:



  • 2 yr warranty on material and workmanship w/ POP

Product Description

    Horizontal tilt design with built-in handle. 1,500 lb. capacity.

Customer Reviews

Most helpful customer reviews

10 of 10 people found the following review helpful.
5Best load leveler I could find on Amazon
By ShadeTreeMechanic
Because I was on a deadline, and couldn't tell much from the photos, I ordered 3 different load levelers on Amazon: this unit, the Mountain Sling (Handsontools) and Engine Lifting Sling, Load Leveler by CVF Supply (cheap-not worth the money. The other units had no bushings, and a cheap crank, both of which would make it difficult to crank and manipulate under load. I kept the OTC from Costplustools-it was well made, and had the design details such as bushings, good attachment points and a good handle. I recommend this unit from Costplustools-you will be glad you did when you are pulling that engine.OTC Engine Load Leveler - 4305

9 of 9 people found the following review helpful.
5an excellent product
By austin dunk
If the previous review sounds like an advertisement for one of the retailers, don't be concerned. I bought this after the threaded rod on a brand new Harbor Freight "4-ton" leveler bent when I used it to pull an alloy-head 6 cylinder engine. I did some research and ended up buying this OTC model. It is excellent quality and works very well. The bearings at both ends allow easy adjustment under load. The Larin leveler is also a good choice, but stay away from the other cheap ones-- you'll wish you spent and extra $20 - $40 for a good one. Check the prices with shipping included, Amazon has a higher price (as of this writing), but it ships for free so it was a better deal.

5 of 5 people found the following review helpful.
5Make Life Easy
By R. Cohen
Bought the OTC leveler to install the engine & trans in my Spitfire. With my wife assisting, took all of 15 minutes to get them in place and bolted down. I should have gotten a refund on the engine hoist rental! Do yourself a favor and use this leveler instead damaging paint and fingers.

See all 12 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy OTC 4305 1500 lb. Engine Load Leveler

Buying OCZ OCZ2M8002G PC2-6400 CL 5-5-5-15 DDR2 800MHz SODIMM 2GB Module

OCZ OCZ2M8002G PC2-6400 CL 5-5-5-15 DDR2 800MHz SODIMM 2GB ModuleBuy OCZ OCZ2M8002G PC2-6400 CL 5-5-5-15 DDR2 800MHz SODIMM 2GB Module

OCZ OCZ2M8002G PC2-6400 CL 5-5-5-15 DDR2 800MHz SODIMM 2GB Module Product Description:



  • 800MHz DDR2 /CL 5-5-5-15
  • Available in 1GB, 2GB Kit, 2GB, and 4GB kit  
  • Unbuffered/1.8 Volts/200 Pin DIMM
  • Lifetime Warranty   

Product Description

OCZ DDR2 SO-DIMMs are built to provide optimal levels of compatibility using the highest quality components available. Each module comes backed with industry leading technical support and the OCZ Lifetime Warranty, ensuring complete product satisfaction for unparalleled peace of mind.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
5Great buy for a netbook
By Stan H.
I purchased an asus 1005HA that only had 1gb ddr2 ram installed. I haven't had any issues with my netbook and it was very easy to install. The ram was also on sale for around 20$ making it the lowest price for the specifications. I would recommend this to anyone that wants more speed and capabilities for their netbook.

1 of 1 people found the following review helpful.
5Great product!
By Gener S. Flores
My sr 190 enjoy every ram space it can offer. Backed up its pre installed 2 gig ram.

2 of 3 people found the following review helpful.
5Mine seems to be cl4 stable despite cl5 labelling.
By T. Nolte
naturally im really happy with it.its in an asus 1000he and although i dont routinely OC it i have tooled around with SetFSB and gotten it seemingly stable to 275/760, 2ghz.others have not gotten this high with it despite theirs also being timed at 4s.... so i wouldnt EXPECT to get one this fast but i still have to give it props.

See all 18 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy OCZ OCZ2M8002G PC2-6400 CL 5-5-5-15 DDR2 800MHz SODIMM 2GB Module

Best Konica Minolta A06V133 A06V133 High-Yield Toner, 12000 Page-Yield, Black

Konica Minolta A06V133 A06V133 High-Yield Toner, 12000 Page-Yield, BlackBuy Konica Minolta A06V133 A06V133 High-Yield Toner, 12000 Page-Yield, Black

Konica Minolta A06V133 A06V133 High-Yield Toner, 12000 Page-Yield, Black Product Description:



  • Quality results.
  • Formulated for superior adhesion.
  • Boosts productivity.

Product Description

Expect quality results from an OEM leader in document technology. Formulated for superior adhesion, giving outstanding results. Installs easily, limited downtime and boosting productivity.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
5Toner Makes Me Happy
By P. Glass
I have discovered, through trial and error, that my Konica-Minolta Magicolor 5670EN does not operate well without toner. Who would have guessed? This means that, in order to keep the printer running optimally, one must feed it toner.It's worth noting that the cost of toner, if I refill all the toner cartridges this lovely printer can take, is more than I paid for the printer itself. I understand that this has become the economic model in the printer industry. For some, this means it is cheaper to buy a new printer than to purchase expensive toner or ink. Konica-Minolta is ahead of that curve, though. By making the Magicolor 5670EN more than seventy pounds, this company has ensured that I will never want to move the printer, much less leave it outside for a trash collector to lift, causing a herniated disk. How would I live with myself, injuring another human being who is merely trying to do his job simply so I can save a few dollars? No, I will replace the toner cartridges. They are much lighter.Now, this particular toner is fabulous. It is the genuine article: made by Konica-Minolta for its printers to exacting specs. This black, high capacity cartridge contains, in fact, very black toner. I would have been fine with black that was as black as day-old coffee or as black as a moonless night, but no. This toner is as black as the watchful eyes of a cobra, I tell you. As black as Satan's heart. When you look into this toner, this toner also looks into you. Try this toner and you will never buy third-party toner again. Once you go this black, you never go back.On top of that, this toner is high capacity. This is no snack toner. This is a meal. It will take you some time to use all of this very black toner. Just in case, I printed out my last will and testament with this toner -- it printed wonderfully -- and bequeathed the remaining toner to someone. That's how long this high capacity toner can last. That means printing a lot of things that, hopefully, are not embarrassing, wasteful trash like insurance claim forms or tax bills. When I finally finish with this toner, I hope to be wiser and more worldly. How many toners can offer you that hope?So, in summation, buy this toner if you happen to have a Konica-Minolta Magicolor 5670EN. If you don't have that particular printer, the toner will not do you much good at all even as magnificent as it is. However, if you do own this particular brand of very heavy printer, this is the toner for you if you also happen to print black things and want them to be very black indeed and if you also want for that black toner to last a long time. If you meet all those requirements, this toner is just as right for you as it was for me. Toner love? Yes, it happens.

0 of 0 people found the following review helpful.
5Konica Black Toner for Magicolor 5670EN
By Ross Wilber
Works good, lasts a long time, we print out quite a few pages daily. It is just a bit expensive for the Konica brand, but worth it.

0 of 0 people found the following review helpful.
5Black - High Capacity A06V133 Konica-Minolta
By Ashok Soni
Very happy with the product. It is genuine product made in Japan assembled in China. Installed in my printer Konica Minolta Magicolor 5670 ( which incidentally is a great printer). The printer is working fine with the cartridge.

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Konica Minolta A06V133 A06V133 High-Yield Toner, 12000 Page-Yield, Black

Compare OTC 1532 2-Ton Capacity Aluminum Racing Jack

OTC 1532 2-Ton Capacity Aluminum Racing JackBuy OTC 1532 2-Ton Capacity Aluminum Racing Jack

OTC 1532 2-Ton Capacity Aluminum Racing Jack Product Description:



  • Made from aircraft-grade aluminum lifts two tons and weighs only 43 lbs
  • Five pumps to maximum height of 18 inch
  • Low profile 3-1/2 inch makes it perfect for ground hugging high performance cars
  • Two-piece 45 inch long handle snaps together for quick setup
  • Removable rubber saddle pad protects vehicle and prevents slipping

Product Description

Aluminum Racing Jack that Lifts two tons and weighs only 43 pounds. Made from aircraft-grade aluminum and with dual pump pistons you reach the maximum height of 18 inch with only 5 pumps. Low profile 3-1/2 inch makes it perfect for ground hugging, high performance cars. Includes side-mounted handles for quick and easy carrying and the removable, rubber saddle pad protects vehicle and prevents slipping. The two-piece 45 inch long handle snaps together for quick and easy setup. Backed by OTC feets lifetime marathon warranty.

Customer Reviews

Most helpful customer reviews

52 of 54 people found the following review helpful.
1Terrible Jack, Falsely advertised Warranty
By B. Eapen
This is one badly made jack combined with false advertising on their Lifetime warranty.Jack came in quickly from amazon. Looked pretty. Made in China. I did the bleed routine but found the first 1/4th of the lever movement was flat spot/ free play, and didn't do any actual lifting. I attributed this to a quirky jack and it didn't bother me much especially due to the lifetime warranty. If it wasn't for the warranty, it would've gone right back. Jack worked great otherwise though the force required was a good bit more than any other Jack I've had, even with the long lever. It was way more effort than the $100 Torin Race Jack sold here on amazon. The effort itself didnt bother me, but gave me the feeling that the leverage was wrong and the piston assembly was under undue stress. Kinda like it was trying to lift more than it should per stroke to aid quicker lifting. I could feel the lever bending, something Ive never experienced in any of the jacks Ive used before. All the jacks ive used before, I could lift the car with just my arm muscle. On this jack, sometimes it was easier to just lean on it with my body weight. This wasn't very confidence inspiring, but I assumed this is how it was designed, I did'nt care as long as it worked.About 10 months into my ownership, and about 20 uses, the jack started leaking. There was no local places to warranty the jack so I called the nearest dealer in Canada and he used some choice words to describe OTC and their products and said they no longer do OTC stuff due to the number of returns they've had. He asked me to call the OTC distributor in Ontario. I called the main distributor for OTC Canada, he just asked me to return it to the place of purchase so that an OTC agent can look at it and decide on its/my fate. I asked if they could just send me the hydraulic unit and they said no they dont do that, since its a full assembly and has to be replaced/repaired as a whole or something along those lines.So I called up the nearest US warranty place and I explained the situation to him. The moment I said Lifetime Warranty, he interrupted me immediately and corrected me saying " Limited " lifetime warranty for Parts and Labor. So I asked him, does the seal leaking within 10 months, with no more than 20 lifts constitute a bad part? He said, it could be, you will have to speak to OTC directly. I couldnt get through to OTC, so I called another dealer and he point blank said,no warranty, we repair those jacks all the time, Leaking seals are not a warranty item, its 34.99 bucks labor + whatever parts costs + shipping both ways ( about $60). I asked him if he could just send me the hydraulic unit to save on shipping but that was a no go.At this point, I just packed it all up and sent it back to amazon, paid 30 bucks in shipping. It was more than year old by then and I dont care if I dont see a single buck for it but I dont want it in my garage anymore and I refuse to deal with OTC.The main reason I bought this jack for 250 bucks is because I didnt wanna spend 100 bucks every year to raise and lower my car 20 times. When they said lifetime warranty, I had the feeling that they actually trusted their product enough to issue such a warranty, and, in case I had issues, Id get it replaced immediately. I had the $100 Torin Racing Jack previously, and it did the same job for the same time, 1 year, 20 odd lifts and died, but did the whole thing for a 100 bucks. Torin even sent me a full hydraulic assembly for FREE but that failed shortly thereafter.Just another junk chinese jack with a misrepresented warranty. I cant imagine how many people fall for the "lifetime" warranty advertised. I know i did. Do yourself a favor before you buy this jack, call up an OTC dealer in your area and tell them you have a failed jack and see what they say.....

21 of 22 people found the following review helpful.
4Good product - great price
By Reviewer
After my Sears floorjack of 25 years stopped working, I decided to buy a new aluminum jack to replace it instead of rebuilding my old one again. A quick glance at the reviews of the newer Sears floor jacks left me discouraged...all had bad reviews! I then found this jack online for a good price and it had a great warranty so I ordered it. I've only used it a handful of times, but it works great so far. It weighs less than half of my old steel Sears jack, is easy to move around, pumps up to meet the jacking points fast, and is easy to release. The effort required to jack up my truck is harder than with my old jack, but it's not terrible (I think this is due to the fast-pumping action this one has. With no load, this one reaches full lift at 5 pumps (vs. 23 pumps with my old Sears)).Overall, I am very happy with this jack so far and feel comfortable recommending it. And the one I got came with two matching jack stands, too. Shopping for it online, I found that Amazon had the cheapest price by a fair margin.

15 of 16 people found the following review helpful.
5OTC 1532 jack with OTC 1582 jack stands
By Ralph Fodell
The OTC 1533 Racing Jack Pack contains one OTC 1532 Aluminum Racing Jack OTC 1532 2-Ton Capacity Aluminum Racing Jack and one OTC 1582 pair of two ton aluminum jack stands. The product description does not make that clear so I went to the OTCtools website and did a search for the 1533 combination before making my purchase. All items are shipped in a single carton.Some people have mentioned difficulty removing the wire retainer used to hold the handle receptacle in place during shipping. Found if you push down on the handle attaching point it will give you enough slack to remove the wire.Also found the Prothane 19-1405 5" jack pad Prothane 19-1405 Red 5" Jack Pad fits nicely to protect the paint on your vehicle sill.

See all 88 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy OTC 1532 2-Ton Capacity Aluminum Racing Jack

Price Comparisons for Cherry finish queen anne writing desk and chair set.

Cherry finish queen anne writing desk and chair set.Buy Cherry finish queen anne writing desk and chair set.

Cherry finish queen anne writing desk and chair set. Product Description:



  • Cherry Finish
  • Chair & Desk!
  • Desk Has Middle Drawer
  • Decorative Brass Pulls
  • 42"L X 22"W X 30"H

Product Description

Cherry finish queen anne writing desk and chair set , desk measures approx 42" x 22" x 30" H

Customer Reviews

Most helpful customer reviews

5 of 6 people found the following review helpful.
5looks adorable in my place and is nicely made for the price
By Jellybean08
I purchased this desk/chair combo and i love it. I was extremely easy to put together, and I am a single female who hates doing those types of things. The color is appealing, and the chair is just adorable. It doesnt look like the price I paid for, doesnt look cheap at all. It is nicely made for the price, and is a decent size, not too big and not too small. Only complaint I would give is if you need a desk for storage then this isn't the desk for you. It has only one drawer, the middle one, and I use that for pens and such.

0 of 0 people found the following review helpful.
4OK for the Price
By arizona123
We now have 3 of these Queen Anne desk and chair sets. Bought the 1st in 2003 for about $250. It's excellent. Use it everyday. Bought the 2nd in 2010 for $225. It's good, but noticeably cheaper in terms of construction and appearance than the earlier version. Bought one more in Nov. of 2011 for $200 (including about $50 of shipping), and boy has the quality declined. I don't know who makes these now, but they seem to get cheaper in price and cheaper in quality too. The 2011 chair set was so bad, I couldn't even get all the parts to fit the chair. So, the chair is only held up by 3 of the 4 necessary bolts. I'm worried it will break when someone is sitting in it. I know it's not me b/c I've put together this same set with no problems twice before. It's just getting less well made as the price goes down. I'm still giving it 4 stars b/c it is very pretty and probably still looks nicer than one would expect for so cheap. But, if you can afford better, I'd skip this unless it's for a kid or something and you're not expecting much.

0 of 0 people found the following review helpful.
5Purchased through amazon.com. Always a good choice
By Jon A. Bury Sr.
This is a very beautiful desk and chair. Bought for a spare bedroom as a vanity/makeup table. We had a slight problem with 1 leg on the chair and the seller took care of it immediately. When we received the replacement part, everything was fine. Easy to put together. I had never put a chair together before, I couldn't believe how easy it was. Deep rich look to it. We will be purchasing end tables and a wall table as well to match. VERY SATISFIED!

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Cherry finish queen anne writing desk and chair set.

Price Compare Oscar Schmidt OG10CEFYS Folk Acoustic Electric Guitar

Oscar Schmidt OG10CEFYS Folk Acoustic Electric GuitarBuy Oscar Schmidt OG10CEFYS Folk Acoustic Electric Guitar

Oscar Schmidt OG10CEFYS Folk Acoustic Electric Guitar Product Description:



  • Concert size body
  • High gloss finish
  • Multi-ply binding
  • Fully adjustable truss rod
  • Chrome die cast tuners

Product Description

Concert size body, High gloss finish, Select spruce top, Catalpa sides & back, Rosewood fingerboard & bridge, Mahogany neck, Multi-ply binding, Fully adjustable truss rod, Chrome die cast tuners, WT92 preamp system

Customer Reviews

Most helpful customer reviews

13 of 13 people found the following review helpful.
5Beautiful Guitar, Great Sound
By Robert R. Freund
A really wonderful folk/concert sized steel string guitar that sounds just great. In terms of sound, it's got a slightly earthier tone to it, but also sounds slightly smaller than a dreadnought just because it's slightly smaller that other guitars. In terms of looks, you cannot beat it; the photo doesn't really do it justice. I sort of took a leap in purchasing this, and do not at all regret doing so.

8 of 8 people found the following review helpful.
5I love it!
By guaver
This is my first acoustic guitar and I love it. There were no reviews on this guitar when I bought it but people had nothing but good things to say about the other Oscar instruments on amazon. When I got mine in the mail I went down and got some new strings for it. I fell in love with the sound right away. It really is a thing of beauty.

5 of 5 people found the following review helpful.
2Not bad for the value, but BUYER BEWARE
By Jamie M. Albert
This guitar is a good buy for the money, but with the new wave budget Oscar Schmidts, you have to watch out. They come up horribly setup from the factory and if they don't go through a good dealer you're going to get problems that other reviewers have listed... bad setup, electronics don't work, etc. Unfortunately Oscar Schmidt was bought by the same company that also now owns the Washburn name (which also come terrible half the time nowadays... though they sell upper scale models they also sell budget Washburns at Target).You're welcome to read my "So you want to own an Oscar Schmidt Guitar?" review under product review guides. Amazon always deletes the link but it will come up under that name.

See all 9 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Oscar Schmidt OG10CEFYS Folk Acoustic Electric Guitar

Compare Prices for MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Black)

MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Black)Buy MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Black)

MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Black) Product Description:



  • MartinLogan high quality single speaker
  • CLS Generation 2 electrostatic transducer - the world's most accurate transducer technology
  • Direct connection to devices with variable level controls, such as digital music players, flat screen television, computers, and home theater receivers
  • Ultra-efficient high-resolution 200-watt switching amplifier
  • RCA line level input and speaker level binding post inputs

Product Description

Product Description Coming

Customer Reviews

Most helpful customer reviews

31 of 31 people found the following review helpful.
5Magnificent
By D. Michael Sanford
I have been a long-time user of Martin-Logan products and knew both partners when they sold stereo equipment in Lawrence, Kansas back in the early 80's. My first product to hear was the Monolith and I owned the original Quest. When buying M & L you must realize that you are buying a piece of scientific equipment. One, you are purchasing an electrostatic panel and two, you are purchasing a speaker that will need to be placed OPTIMALLY in your room to get the best sound possible. Those rules are: Electrostatic elements DO NOT LIKE a smokey environment. If you smoke or you burn incense and/or candles, over time your electrostatic panels will accumulate a film that will affect the sound of the speaker. Since the panel has an electronic charge, it will have the necessary ingredients to form that film from air-borne contaminants.Location, location, location. All electrostatic panels push sound from the front AND from the rear. If you do not have your speakers placed away from the back wall, you will find that the sound from the rear of the panel will be out-of-phase compared to the sound from the front. The two sounds will cancel each other either partially or fully making a muddy sound. You want the sound to be ideal since the sound pressure from the rear of the panel is what gives that "encompassing" sound that these speakers are known for. Ideally, you will need at least two feel of space behind the panel and the speaker will need to be toed in to eliminate that interference. If you have a room that is not large enough to place these speakers and still contain your large screen TV AND THE REST of your furniture, then don't purchase them, you will not get the enjoyment from them as you might think you will. If you follow the rules, you will have the most enjoyable speaker made by man.Now the power. You may ask; "why does it have a internal power amplifier?" One of the early requirements with M & L speakers were that they were quite power hungry. Later models addressed that problem, but they still required a power amplifier that moved a lot of Current (amperes) not Power (watts). Consequently, people who bought these speakers also had a lot of money rapped up in an expensive high current power amplifiers. Since these M & L's have the power built in and are matched to the speaker, the extra money to purchase these speakers are well worth it. Remember, you are purchasing TWO mono-power amps when you purchase two speakers. That alone is worth at least $1200 if you were to purchase two high end power mono current amps by themselves. You can also use the speakers to play back any device that has a built in volume control and a line level output source, e.g iPod, Satellite Radio, even your computer. As a surround system, you will need at least four of these units plus a center channel or another one of M & L's speakers that are matched to these units. Remember, if you use self powered speakers you are running line-level signal wires instead of speaker wires that tend to loose efficiency over long runs as do the line-level signals but not as much and which are more stable.All in all, these are probably the best value out there for a high end speaker that has the sonic wonderment that most people will marvel at. If you ever auditioned a pair of these speakers, you will not want anything else in your home.

32 of 34 people found the following review helpful.
5How can you not be impressed?
By Kenneth Harden
Its unfortunate reviews are used as a way to criticize distribution methods and not discuss the product itself.At $3k, these are not cheap speakers, but once you learn what is really inside of them, and what they are capable of, it is an impressive feat. Between the built-in amp, two very nice woofers, and a expensive electrostatic panel which is the result of 20 years of refinement, you are getting something very special. All of these features lead to...great sound...which is why you are buying these in the first place!As for the concerns about the cherry finish - view this as a decision to spend the money on the sound quality and not on cosmetics. They don't look bad at all, but realize it is a vinyl cherry finish (as in, not real wood). An analogy would be the 'cheap' interior on the Corvette. There is a reason they can get $100k car performance out of a $50k car. Yet, when you are driving one, you no longer care about the feel of the plastic on the passenger air bag cover. If you are that concerned about the finish, MartinLogan does make speakers above these which feature real wood finishes.If you love movies and music, these speakers will delight you. Forget the cherry finish, forget that you ordered them on Amazon. Set them up, dim the lights, and open your ears.

13 of 15 people found the following review helpful.
4Superlative Performance
By B Gutz
I bought a pair of these eight months ago and I absolutely love the sound.. It is the next best thing to actually having the band in the room with you. The only down side is the Cherry Case is slightly cheap looking but when you consider the whole package these speakers pack a lot of value.. The overall look is very classy, let these speakers do what you really bought them for (tremendous sound quality) they are a solid investment and serious ear candy. You will want a subwoofer to hit the very low frequencys that are out of this speakers rated range. (See Martin Logan Abyss)- This speaker has been discontinued....

See all 17 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy MartinLogan Purity Fully-Powered Hybrid Electrostatic Loudspeaker (Single, Black)

Best Cherry finish wood bombe chest console table with black marble top

Cherry finish wood bombe chest console table with black marble topBuy Cherry finish wood bombe chest console table with black marble top

Cherry finish wood bombe chest console table with black marble top Product Description:



  • Some assembly may be required. Please see product details.

Product Description

CABINET features a rich cherry finish with a black marble top. NoPart: 950053

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
4Beautiful Cherry finish wood bombe chest
By lbgo7
I bought this thru Amazon, I really got it at a good price thats one of the reasons why I love this bombe chest.. when I got the chest one of the legs had a piece broken.. well I didnt want to go thru all the hassle of returning it.. so we just glued the little piece you cant even notice its small.. that was the only bad part other than that the table is awesome..I tried calling the actual store visiondecor but their phones really suck but when you email them they actually respond and help you with all your needs...

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Cherry finish wood bombe chest console table with black marble top

Affordable Acad INTUOS3 12X12 Cad Users Incl USB Tab Pen Mouse

Acad INTUOS3 12X12 Cad Users Incl USB Tab Pen MouseBuy Acad INTUOS3 12X12 Cad Users Incl USB Tab Pen Mouse

Acad INTUOS3 12X12 Cad Users Incl USB Tab Pen Mouse Product Description:









Product Description

ACAD INTUOS3 12X12 CAD USERS

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Photoshop Helper
By S. Faulk
Acad INTUOS3 12X12 Cad Users Incl USB Tab Pen MouseFinding this product can be a little hard on Amazon because many people are looking for the Wacom name but it only comes up as Acad. I hope Amazon can update the ad to include Wacom (I bet they will sell more).This pad is pretty big so make sure you have some room on your desk! It really can make many Photoshop task easier and more fun. It works well with other programs too so if you get one make sure and try it out! My friend's daughter enjoys using Corel Painter with it.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Acad INTUOS3 12X12 Cad Users Incl USB Tab Pen Mouse